Gives the opportunity to suppliers to meet one on one with an airline representative. The duration of a mini-meeting is approximately ten (10) minutes.

SCHEDULE YOUR MINI-MEETINGS

Mark your calendars: you will be able to schedule your mini-meetings starting in Apr 21, 2025 at 12:00PM Eastern Time

GENERAL INFORMATION

Airlines will meet suppliers in a series of 10-minute time slots on:

Date Mini-Meeting Time Coffee Break
Monday May 19th, 2025 14:15 – 16:15 & 16:45 – 18:15 16:15 - 16:45
Tuesday May 20th, 2025 09:30 – 11:10 & 11:40 – 13:30 11:10 - 11:40

Each participating airline will have a minimum of one mini-meeting table. Please note some airlines will have more than one table available.

REGISTERING FOR A MINI-MEETING

The mini-meetings registration process is done entirely online. A list of participating airlines will be sent to all registered participants under the mini-meeting category who request it. Each registered supplier will use his/her password (which is set at the time of registration) to book their mini-meetings. When accessing the mini-meetings section of the website, suppliers will be able to view the following:

  • A list of registered airlines up to that moment.
  • Each airline representative will have listed their specific area: Purchasing, Repair or General (Note: some airlines will have more than one table available)
  • The available time for each meeting is ten (10) minutes per meeting unless the event organizer requires an adjustment.
  • The name of the airline representative will not be shown during the Mini-meeting register.

DURING THE MINI-MEETINGS

  • The mini-meeting ballroom will have a clock displaying the time left for each meeting.
  • Suppliers that are registered for a mini-meeting may wait in a room next to the main meeting room.
  • A floorplan of the meeting tables will be displayed for the suppliers to identify the location of the respective airlines or MROs.
  • A maximum of two attendees from the same supplier company may participate in each mini-meeting. Both must be registered as mini-meeting attendees and only one should have requested the meeting.
  • An announcement will be made to indicate when there is one minute left for each meeting.

We strongly request all suppliers to respect these time limits!

MINI-MEETING SCHEDULE

Important Facts to Know When Registering for Mini-Meetings 

  • Mini-meeting registration is done entirely online.
  • Mini-meeting scheduling is on a first-come, first-serve basis, and subject to availability.
  • There are a limited number of mini-meetings time slots available. Therefore, we highly recommend registering for the ALTA CCMA & MRO Conference early.
  • All attendees registering for the conference to participate in mini-meetings will have the right to book mini-meetings according to the following calendar:
    • Stage 1 | April 21st, 2025 | 3 mini-meetings (4 weeks before the event)
    • Stage 2 | April 28th, 2025 | 3 mini-meetings (3 weeks before the event)
    • Stage 3 | May  5th, 2025 | 3 mini-meetings (2 weeks before the event)
    • Stage 4| May 12th, 2025 | 3 or more mini-meetings (1 week before the event) | Subject to availability
  • On-Site Registration: Attendees are allowed to register on-site during the conference and schedule available mini-meetings.

MINI MEETINGS FAQ

1. How many mini-meetings can I arrange?

Throughout the first three stages, attendees may begin by registering to three mini-meetings per stage. In case of availability, a fourth stage will be open. This limit is established to provide all participants registered under the mini-meeting category a fair chance to select meetings.

Please be aware that during each one of the stages all mini-meetings will be assigned on a first-come, first-served basis. We highly recommend all participants registered under the mini-meeting category to register his/her mini-meetings as soon as we open each one of the stages.

  • Stage 1 | April 21st, 2025 | 3 mini-meetings (4 weeks before the event)
  • Stage 2 | April 28th, 2025 | 3 mini-meetings (3 weeks before the event)
  • Stage 3 | May 5th, 2025 | 3 mini-meetings (2 weeks before the event)
  • Stage 4 | May 12th, 2025 | 3 or more mini-meetings (1 week before the event) | Subject to availability

Mini-meetings will be opened at 12:00 noon Eastern Standard Time on the given dates before. We will send you an email a few days before the beginning of the mini-meetings selection process to notify you when you may start selecting mini-meetings.

Yes, however remember that the system is based on a first-come, first-serve basis.

No, with your own User ID and password you may access the website as many times as you wish to select or modify your choices.

Yes, you are able to make all the changes that you wish, which of course are subject to the airline’s availability and other general restrictions.

The agenda tool will immediately confirm the requested meetings.

Each mini-meeting has a duration of 10 minutes. Out of fairness to airline personnel and fellow suppliers, mini-meeting participants must respect the 10-minute limit. The CCMA staff will provide an audible tone to signal each appointment. Please respect the 10-minute limit by leaving the table immediately.

This is precisely why, in addition to the meeting sessions, the CCMA/MRO offers a full and varied agenda of social and networking activities, so that business opportunities are not solely limited to the private mini-meeting schedule. The social and networking activities are a great way to interact with all the participants and serve as a tool for maximizing your objective.

Yes, as long as they provide different services. ALTA will monitor mini-meetings and might contact you or your teammate to question about multiple meetings with the same airline to ensure that all participants have the same opportunities.

Up to two supplier’s representatives registered under the mini-meeting category from the same company are permitted at any given mini-meeting appointment. Despite this, the mini-meeting must be booked by only one of the representatives.

Only the participants who have meetings scheduled on that time slot will be permitted in the mini-meetings room. At no time will accompanying guests (non-commercial companions) be allowed in the mini-meeting area.

Not showing up for a pre-scheduled meeting not only negatively affects the selected airline, but also other suppliers, since both will have lost a time slot. We therefore recommend that you take time to carefully analyze each of the potential mini-meetings that you wish to attend during CCMA and that you attend the mini-meetings you schedule.

For an additional USD $220 for a registered Sponsor participant without mini meeting or USD $350 usd for a registered Non-Sponsor participant will be able to attend mini meetings as a business companion mini meetings registered participant alongside same company colleague who has a registration with mini meetings badge and accompany his colleague to their pre-scheduled mini meetings.  If you would like to update your registration, please contact conferencesandmeetings@alta.aero . We strongly encourage you to have at hand the information of the supplier with mini-meetings you will join as a business companion.

Brandi Dague
HEICO Corporation

Brandi Dague is Vice President of Sales The Americas and Global Customer Servicefor HEICO Parts Group, the world’s largest independent designer, manufacturer and distributor of jet engine and aircraft component parts. Brandi has been with HEICO for nineteen years and has held numerous key Sales positions with increasing responsibility during her tenure.  Prior to joining HEICO, Brandi was employed by Air Canada Technical Services and Delta TechOps where she held various Engineering and Salespositions. Brandi holds a Bachelors of Engineering from Georgia Institute of Technology and a Masters of Business Administration from Georgia State University.

Tony Mueller
Delta Airlines

Tony graduated with a BS degree from the University of Georgia and a Bachelor of Aerospace Engineering degree from Georgia Tech.  Tony began his career as a design and support engineer with McDonnell Douglas (now Boeing) on the C-17 program in Long Beach California.  In 1992 he joined Delta in Atlanta as a Liaison Engineer supporting the wide body fleet of aircraft.  Over his 32 year career he has held positions of increasing responsibility and is currently an engineering Director and the Chief Engineer where he is responsible for Delta’s 24×7 engineering support, Delta’s PMA program, Additive Manufacturing, ODA, Tooling Engineering, advanced structural analysis, and materials and process equivalency.  Tony is a long-time resident of Georgia and currently resides in Marietta with his wife Amy where they raised their three sons and now their new dog Zeppelin.

Carlos Garcia
Oliver Wyman

Carlos Garcia Martin is a Partner in Oliver Wyman’s Transportation & Services practice, primarily focusing on large-scale cost takeout and operations engagements. With over 15 years of consulting experience, he has advised clients in various sectors of the aviation community across the U.S., Europe, South America, and Asia. His expertise lies in commercial aviation, manufacturing, and the MRO market. He has led value creation diagnostics, delivered sustainable operational improvement initiatives for passenger and cargo airlines, designed strategies and processes for airline maintenance organizations, and evaluated fleet and MRO market forecasts. Additionally, he has provided guidance to top-tier Private Equity firms on aviation-focused strategic investments. 

Carlos holds an MBA from IESE Business School and MIT Sloan School of Management, where he graduated with honors. He also holds an MSc (Summa Cum Laude) in Industrial Engineering from Universidad Pontificia Comillas.